Summary
- Registrar
- —
- Status
- serverRenewProhibited
- Created on
- —
- Expires on
- —
- Name servers
- ns2.superloop.com, ns1.superloop.com
- Mail servers
- —
- DMARC
- Reject
- SPF
- Strict
- DKIM
- No key found among the common selectors
- Website
- See the website
Spoofing protection (DMARC)
E-mails spoofing this domain are rejected.
DMARC tells mail servers what to do with an e-mail that claims to come from superloop.au but fails SPF and DKIM checks.
- Policy
- Reject
- Subdomain policy
- Reject
- Messages covered
- 100%
- DKIM alignment
- Strict
- SPF alignment
- Strict
- Aggregate reports
- [email protected]
- Failure reports
- —
Record
v=DMARC1; p=reject; rua=mailto:[email protected]; adkim=s; aspf=s;
Authorized senders (SPF)
E-mails sent by any other server are rejected.
SPF lists the servers allowed to send e-mails for superloop.au.
| Rule | Value | Result |
|---|---|---|
| all | — | Rejected |
Top-level DNS lookups: 0 of 10 allowed
Record
v=spf1 -all
MX, SPF, DKIM and DMARC: the e-mail records
Four DNS records make a domain's e-mail work. MX says where e-mails sent to superloop.au arrive; SPF, DKIM and DMARC let mail servers check that an e-mail claiming to come from superloop.au was really sent by this domain, which protects it against spoofing.
MX
An MX (Mail Exchanger) record designates a server that receives e-mails sent to the domain. When someone writes to an @superloop.au address, their mail server queries the DNS for the domain's MX records, then delivers the message to the server they point to.
Example record
superloop.au MX 10 mx1.superloop.au. superloop.au MX 20 mx2.superloop.au.
What the record contains
- 10, 20
- Priority: the server with the lowest number is tried first. Servers with equal priority share the load.
- mx1.superloop.au.
- Host name of the mail server. It must point to an A or AAAA record: an IP address or an alias (CNAME) is not allowed here.
- 0 .
- An MX "0 .", called a null MX, declares that the domain accepts no e-mail: sending servers give up at once instead of retrying.
Declaring at least two servers with different priorities avoids losing e-mails during an outage: sending servers retry for several days and fall back on the backup server. Without any MX, they try to deliver directly to the IP address of the domain.
SPF
SPF (Sender Policy Framework) is a TXT record listing the servers allowed to send e-mails on behalf of the domain. The receiving server checks that the sender is on this list. The final "all" rule says what to do with other servers: reject them (-all), flag their e-mails as suspicious (~all) or make no decision (?all).
Example record
superloop.au TXT "v=spf1 mx include:_spf.google.com ip4:192.0.2.10 -all"
What the record contains
- v=spf1
- Identifies the record as an SPF policy. It must come first.
- ip4, ip6
- Allows a specific IP address or an address range, for example ip4:192.0.2.0/24.
- a, mx
- Allows the addresses of the domain itself (A record) or those of its mail servers (MX).
- include
- Allows the servers of another domain, usually a sending service: include:_spf.google.com for Google Workspace.
- -all, ~all
- Final rule, applied to every other server. Its qualifier decides what happens to them: - rejects them, ~ flags their e-mails as suspicious, ? makes no decision, + accepts them (avoid it).
A domain must publish only one SPF record, and its evaluation cannot exceed 10 DNS lookups (include, a, mx, exists, redirect). Beyond that, mail servers treat it as invalid.
DKIM
DKIM (DomainKeys Identified Mail) signs every outgoing e-mail with a private key. The matching public key is published in a TXT record at selector._domainkey.superloop.au, so the recipient can check that the message really comes from the domain and was not altered on the way. The selector is chosen by each sending service and cannot be guessed: Dataweaz checks the most common ones (Google Workspace, Microsoft 365, Mailchimp, SendGrid…), so a key published under another selector may exist without appearing here.
Example record
google._domainkey.superloop.au TXT "v=DKIM1; k=rsa; p=MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA…"
What the record contains
- v=DKIM1
- Protocol version. Optional but recommended, in which case it must come first.
- k
- Key algorithm: rsa, the most common, or ed25519.
- p
- Public key, base64-encoded. An empty value means the key has been revoked.
- t
- Flags: y marks a key in testing, whose failures must not be penalized; s forbids its use for subdomains.
Each sending service publishes its key under its own selector (google, selector1, k1…), which allows several keys and seamless rotation. A 2048-bit RSA key is recommended today.
DMARC
DMARC (Domain-based Message Authentication, Reporting and Conformance) builds on SPF and DKIM. Published on _dmarc.superloop.au, it tells mail servers what to do with an e-mail that fails these checks (let it through, send it to spam or reject it) and where to send reports.
Example record
_dmarc.superloop.au TXT "v=DMARC1; p=quarantine; rua=mailto:[email protected]; adkim=r; aspf=r"
What the record contains
- v=DMARC1
- Identifies the record as a DMARC policy. It must come first.
- p
- Policy applied to e-mails that fail the checks: none (monitoring only), quarantine (spam folder) or reject.
- sp
- Subdomain policy. Without it, subdomains follow the domain's policy.
- rua
- Address that receives daily aggregate reports about e-mails sent on behalf of the domain, whether they pass the checks or not.
- ruf
- Address that receives detailed failure reports, message by message. Few providers still send them.
- pct
- Percentage of e-mails subject to the policy, for a gradual rollout. 100 by default.
- adkim, aspf
- DKIM and SPF alignment: r (relaxed, a subdomain of the same domain is enough) or s (strict, the domain must be identical).
To roll out DMARC without blocking legitimate e-mails, start with p=none and an rua address, analyze the reports to find every service sending on behalf of the domain, then move to quarantine and finally to reject.
DNS records of superloop.au
IP addresses (A and AAAA)
An A record maps the domain name to an IPv4 address: the address of the server that browsers contact to display the website. The AAAA record does the same for an IPv6 address. A domain can have several of them to spread visits across several servers.
| Type | IP address |
|---|---|
| A | 103.7.51.255 |
Name servers (NS)
NS records designate the authoritative DNS servers of the domain: they answer every question about its other records (A, MX, TXT…). They are provided by the registrar, the hosting provider or a dedicated DNS service, and several servers are declared so that the domain keeps working if one of them fails.
| Server | IP address |
|---|---|
| ns2.superloop.com | 125.253.59.220 |
| ns1.superloop.com | 125.253.59.210 |
Mail servers (MX)
MX records point to the servers that receive e-mails sent to the domain, that is to @superloop.au addresses. Each server has a priority: the one with the lowest number is tried first, the others take over if it fails. Without an MX record, the domain cannot receive e-mails.
The domain explicitly declares that it accepts no e-mail (null MX, RFC 7505).
TXT records
TXT records hold free text. They are used to prove ownership of the domain to online services (Google, Microsoft, Facebook…) and to publish e-mail security rules: SPF on the domain itself, DMARC on _dmarc.superloop.au.
| Name | Content |
|---|---|
| superloop.au | v=spf1 -all |
| _dmarc.superloop.au | v=DMARC1; p=reject; rua=mailto:[email protected]; adkim=s; aspf=s; |
Related IP addresses
IPv4 addresses used by superloop.au: website, name servers, mail servers and senders authorized by SPF.
| IP address | Used for | /24 block |
|---|---|---|
| 103.7.51.255 | Website | 103.7.51.0/24 |
| 125.253.59.220 | Name server ns2.superloop.com | 125.253.59.0/24 |
| 125.253.59.210 | Name server ns1.superloop.com | 125.253.59.0/24 |
WHOIS of the domain superloop.au
Domain Name: superloop.au Registry Domain ID: b4b6c64bdf7b48be98f2c14724ec55cd-AU Registrar WHOIS Server: whois.auda.org.au Registrar URL: https://www.godaddy.com/en-au/contact-us Last Modified: 2026-09-12T21:16:42Z Registrar Name: GoDaddy.com LLC trading as GoDaddy.com Registrar Abuse Contact Email: [email protected] Registrar Abuse Contact Phone: +1.4805058800 Reseller Name: Status: serverRenewProhibited https://identitydigital.au/whois-status-codes#serverRenewProhibited Status Reason: Not Currently Eligible For Renewal Registrant Contact ID: 0ca16dae216a4889b97db9498f3ec7e4-AU Registrant Contact Name: Superloop Admin Tech Contact ID: 1b22397160334e34b478b0e288a50a75-AU Tech Contact Name: Superloop Admin Name Server: ns1.superloop.com Name Server: ns2.superloop.com DNSSEC: unsigned Registrant: Superloop (Australia) Pty Ltd Registrant ID: ACN 602286608 Eligibility Type: Incorporated Association >>> Last update of WHOIS database: 2026-10-01T15:00:44Z <<< Identity Digital Australia Pty Ltd, for itself and on behalf of .au Domain Administration Limited (auDA), makes the WHOIS registration data directory service (WHOIS Service) available solely for the purposes of: (a) querying the availability of a domain name licence; (b) identifying the holder of a domain name licence; and/or (c) contacting the holder of a domain name licence in relation to that domain name and its use. The WHOIS Service must not be used for any other purpose (even if that purpose is lawful), including: (a) aggregating, collecting or compiling information from the WHOIS database, whether for personal or commercial purposes; (b) enabling the sending of unsolicited electronic communications; and / or (c) enabling high volume, automated, electronic processes that send queries or data to the systems of Afilias, any registrar, any domain name licence holder, or auDA. The WHOIS Service is provided for information purposes only. By using the WHOIS Service, you agree to be bound by these terms and conditions. The WHOIS Service is operated in accordance with the auDA WHOIS Policy (available at https://www.auda.org.au/whois-policy). % Query time: 759 msec % WHEN: Thu Oct 01 15:00:43 UTC 2026