Dataweaz

fiber.net.id

Summary

Registrar
Asosiasi Penyelenggara Jasa Internet Indonesia
Status
ok
Created on
December 15, 2011
Expires on
December 16, 2028
Name servers
ns1.fiber.net.id, ns2.fiber.net.id
Mail servers
mailprotection.fiber.net.id, mail.fiber.net.id
DMARC
Reject
DKIM
No key found among the common selectors

Spoofing protection (DMARC)

Reject

E-mails spoofing this domain are rejected.

DMARC tells mail servers what to do with an e-mail that claims to come from fiber.net.id but fails SPF and DKIM checks.

Policy
Reject
Subdomain policy
Reject
Messages covered
100%
DKIM alignment
Strict
SPF alignment
Strict
Aggregate reports
[email protected]
Failure reports
[email protected]

Record

v=DMARC1; p=reject; pct=100; ruf=mailto:[email protected]; rua=mailto:[email protected]; adkim=s; aspf=s; fo=1; rf=afrf; ri=86400

Authorized senders (SPF)

Strict

E-mails sent by any other server are rejected.

SPF lists the servers allowed to send e-mails for fiber.net.id.

RuleValueResult
a—Allowed
mx—Allowed
ip427.123.220.181Allowed
ip427.123.220.184Allowed
ip427.123.220.185Allowed
ip427.123.220.167Allowed
ip427.123.220.177Allowed
ip427.123.220.179Allowed
ip427.123.220.209Allowed
all—Rejected

Top-level DNS lookups: 2 of 10 allowed

Record

v=spf1 a mx ip4:27.123.220.181 ip4:27.123.220.184 ip4:27.123.220.185 ip4:27.123.220.167 ip4:27.123.220.177 ip4:27.123.220.179 ip4:27.123.220.209 -all

MX, SPF, DKIM and DMARC: the e-mail records

Four DNS records make a domain's e-mail work. MX says where e-mails sent to fiber.net.id arrive; SPF, DKIM and DMARC let mail servers check that an e-mail claiming to come from fiber.net.id was really sent by this domain, which protects it against spoofing.

MX

An MX (Mail Exchanger) record designates a server that receives e-mails sent to the domain. When someone writes to an @fiber.net.id address, their mail server queries the DNS for the domain's MX records, then delivers the message to the server they point to.

Example record

fiber.net.id  MX  10 mx1.fiber.net.id.
fiber.net.id  MX  20 mx2.fiber.net.id.

What the record contains

10, 20
Priority: the server with the lowest number is tried first. Servers with equal priority share the load.
mx1.fiber.net.id.
Host name of the mail server. It must point to an A or AAAA record: an IP address or an alias (CNAME) is not allowed here.
0 .
An MX "0 .", called a null MX, declares that the domain accepts no e-mail: sending servers give up at once instead of retrying.

Declaring at least two servers with different priorities avoids losing e-mails during an outage: sending servers retry for several days and fall back on the backup server. Without any MX, they try to deliver directly to the IP address of the domain.

SPF

SPF (Sender Policy Framework) is a TXT record listing the servers allowed to send e-mails on behalf of the domain. The receiving server checks that the sender is on this list. The final "all" rule says what to do with other servers: reject them (-all), flag their e-mails as suspicious (~all) or make no decision (?all).

Example record

fiber.net.id  TXT  "v=spf1 mx include:_spf.google.com ip4:192.0.2.10 -all"

What the record contains

v=spf1
Identifies the record as an SPF policy. It must come first.
ip4, ip6
Allows a specific IP address or an address range, for example ip4:192.0.2.0/24.
a, mx
Allows the addresses of the domain itself (A record) or those of its mail servers (MX).
include
Allows the servers of another domain, usually a sending service: include:_spf.google.com for Google Workspace.
-all, ~all
Final rule, applied to every other server. Its qualifier decides what happens to them: - rejects them, ~ flags their e-mails as suspicious, ? makes no decision, + accepts them (avoid it).

A domain must publish only one SPF record, and its evaluation cannot exceed 10 DNS lookups (include, a, mx, exists, redirect). Beyond that, mail servers treat it as invalid.

DKIM

DKIM (DomainKeys Identified Mail) signs every outgoing e-mail with a private key. The matching public key is published in a TXT record at selector._domainkey.fiber.net.id, so the recipient can check that the message really comes from the domain and was not altered on the way. The selector is chosen by each sending service and cannot be guessed: Dataweaz checks the most common ones (Google Workspace, Microsoft 365, Mailchimp, SendGrid…), so a key published under another selector may exist without appearing here.

Example record

google._domainkey.fiber.net.id  TXT  "v=DKIM1; k=rsa; p=MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEA…"

What the record contains

v=DKIM1
Protocol version. Optional but recommended, in which case it must come first.
k
Key algorithm: rsa, the most common, or ed25519.
p
Public key, base64-encoded. An empty value means the key has been revoked.
t
Flags: y marks a key in testing, whose failures must not be penalized; s forbids its use for subdomains.

Each sending service publishes its key under its own selector (google, selector1, k1…), which allows several keys and seamless rotation. A 2048-bit RSA key is recommended today.

DMARC

DMARC (Domain-based Message Authentication, Reporting and Conformance) builds on SPF and DKIM. Published on _dmarc.fiber.net.id, it tells mail servers what to do with an e-mail that fails these checks (let it through, send it to spam or reject it) and where to send reports.

Example record

_dmarc.fiber.net.id  TXT  "v=DMARC1; p=quarantine; rua=mailto:[email protected]; adkim=r; aspf=r"

What the record contains

v=DMARC1
Identifies the record as a DMARC policy. It must come first.
p
Policy applied to e-mails that fail the checks: none (monitoring only), quarantine (spam folder) or reject.
sp
Subdomain policy. Without it, subdomains follow the domain's policy.
rua
Address that receives daily aggregate reports about e-mails sent on behalf of the domain, whether they pass the checks or not.
ruf
Address that receives detailed failure reports, message by message. Few providers still send them.
pct
Percentage of e-mails subject to the policy, for a gradual rollout. 100 by default.
adkim, aspf
DKIM and SPF alignment: r (relaxed, a subdomain of the same domain is enough) or s (strict, the domain must be identical).

To roll out DMARC without blocking legitimate e-mails, start with p=none and an rua address, analyze the reports to find every service sending on behalf of the domain, then move to quarantine and finally to reject.

DNS records of fiber.net.id

IP addresses (A and AAAA)

An A record maps the domain name to an IPv4 address: the address of the server that browsers contact to display the website. The AAAA record does the same for an IPv6 address. A domain can have several of them to spread visits across several servers.

TypeIP address
A27.123.220.194

Name servers (NS)

NS records designate the authoritative DNS servers of the domain: they answer every question about its other records (A, MX, TXT…). They are provided by the registrar, the hosting provider or a dedicated DNS service, and several servers are declared so that the domain keeps working if one of them fails.

ServerIP address
ns1.fiber.net.id27.123.222.222
ns2.fiber.net.id103.4.165.165

Mail servers (MX)

MX records point to the servers that receive e-mails sent to the domain, that is to @fiber.net.id addresses. Each server has a priority: the one with the lowest number is tried first, the others take over if it fails. Without an MX record, the domain cannot receive e-mails.

PriorityServerIP address
10mailprotection.fiber.net.id27.123.220.184
20mail.fiber.net.id27.123.220.181

TXT records

TXT records hold free text. They are used to prove ownership of the domain to online services (Google, Microsoft, Facebook…) and to publish e-mail security rules: SPF on the domain itself, DMARC on _dmarc.fiber.net.id.

NameContent
fiber.net.idgoogle-site-verification=M0bKGG5Pg46t4jsBE2fMlVZ1WlTIZKdCCZpWs8sid0E
fiber.net.idgoogle-site-verification=lsChMSI_GolHCDRX0-g_mnW5CgAJN5KD_kog7tGY1ZA
fiber.net.idv=spf1 a mx ip4:27.123.220.181 ip4:27.123.220.184 ip4:27.123.220.185 ip4:27.123.220.167 ip4:27.123.220.177 ip4:27.123.220.179 ip4:27.123.220.209 -all
fiber.net.idyahoo-verification-key=89bAqixyqF+NzQatEPgyQpQtBQQ/UUN2cJLuQbcAvsM=
fiber.net.idZOOM_verify_X0nTF8du6473AzrcR2eGgN
_dmarc.fiber.net.idv=DMARC1; p=reject; pct=100; ruf=mailto:[email protected]; rua=mailto:[email protected]; adkim=s; aspf=s; fo=1; rf=afrf; ri=86400

Related IP addresses

IPv4 addresses used by fiber.net.id: website, name servers, mail servers and senders authorized by SPF.

IP addressUsed for/24 block
27.123.220.194Website27.123.220.0/24
27.123.222.222Name server ns1.fiber.net.id27.123.222.0/24
103.4.165.165Name server ns2.fiber.net.id103.4.165.0/24
27.123.220.184Mail server mailprotection.fiber.net.id, Authorized by SPF27.123.220.0/24
27.123.220.181Mail server mail.fiber.net.id, Authorized by SPF27.123.220.0/24
27.123.220.185Authorized by SPF27.123.220.0/24
27.123.220.167Authorized by SPF27.123.220.0/24
27.123.220.177Authorized by SPF27.123.220.0/24
27.123.220.179Authorized by SPF27.123.220.0/24
27.123.220.209Authorized by SPF27.123.220.0/24

WHOIS of the domain fiber.net.id

Domain Name: FIBER.NET.ID
Registry Domain ID: 209051_DOMAIN_ID-ID
Registrar WHOIS Server: 
Registrar URL: https://domain.net.id
Updated Date: 2026-03-13T09:02:09Z
Creation Date: 2011-12-15T13:35:35Z
Registry Expiry Date: 2028-12-15T23:59:59Z
Registrar: Asosiasi Penyelenggara Jasa Internet Indonesia
Registrar IANA ID: 1
Registrar Abuse Contact Email: [email protected]
Registrar Abuse Contact Phone: 
Domain Status: ok
Name Server: NS1.FIBER.NET.ID
Name Server: NS2.FIBER.NET.ID
DNSSEC: unsigned
URL of the ICANN Whois Inaccuracy Complaint Form: https://www.icann.org/wicf/
>>> Last update of WHOIS database: 2026-10-02T20:24:22Z <<<

% Query time: 846 msec
% WHEN: Fri Oct 02 20:24:21 UTC 2026